Telephone: 01732 850070

Part of the Reflex Group

Parts

  • Toshiba B-SX5 Platen Roller

    A rubber roller that helps feed the labels smoothly through the printer and provide a consistent printing surface for the print head. It is located at the front of the printer underneath the print head.

    ➔ Part number 7FM00163000

  • Toshiba B-SX5 Rear Feed Roller

    Another rubber roller similar to the platen roller that helps feed labels smoothly from the media supply holder through the printer. It is located in the middle of the printer directly underneath the pinch belt roller.

    ➔ Part number 7FM00164000

  • Toshiba B-SX5 Pinch Belt Roller

    A rubber belt roller that helps to feed the labels through the printer. The pinch belt roller is supplied as an assembly but often its it the rubber belt itself that splits. It is located in the middle of the printer on the underside of the pinch head block. The pinch belt roller is directly above the rear feed roller.

    ➔ Part number 7FM00169100

  • Toshiba B-SX5 Media Guide Assembly

    The media guide helps feed the labels through the printer and keep it centrally aligned. It is located in the middle of the printer at the rear of the lower block.

    ➔ Part number 7FM00166100

  • Toshiba B-SX5 Print Head

    Thermal transfer print head with 300 dpi print resolution. It is located at the front of the printer on the underneath of the print head block.

    ➔ Part number 7FM01641100

  • Toshiba B-SX5 Head Cam Shaft

    A metal shaft that holds the print head that is also the print head lever (green switch on the side of the print head block). At the front of the printer inside the print head block.

    ➔ Part number 7FM00170000

  • Toshiba B-SX5 Media Sensor Assembly

    A dual sensor with a transmissive sensor for self-adhesive labels and a reflective sensor for card stock. The media sensor is an assembly with an upper and a lower arm. It is located in between the print head block and the pinch belt block. The thermal ribbon is also fed between the blocks.

    ➔ Part number 7FM00175100

  • Toshiba B-SX5 Sensor Harness

    Wiring loom that connects several sensors including the media sensor and ribbon sensor to the main printer electronics. The sensor harness is not normally accessible as it connects to the sensor assemblies and feeds through the side panel to the rest of the electronics.

    ➔ Part number 7FM00122000

  • Toshiba B-SX5 Platen Roller Holder

    A small plastic clip to hold the platen roller in place. It is located at the front of the printer on the lower block. The holder clips onto the outer edge for the platen roller.

    ➔ Part number 7FM00102000

  • Toshiba B-SX5 Rear Feed Roller Holder

    A small plastic clip to hold the rear feed roller in place. It is located in the middle of the printer at the back of the lower block. The holder clips onto the outside edge of the rear feed roller.

    ➔ Part number 7FM00055000

  • Toshiba B-SX5 LAN Card

    An interface board to provide connection to a Local Area Network by Ethernet. When fitted the Ethernet port is located at the rear of the printer next to the Parallel port.

    ➔ Part number B-9700-LAN-QM-R

  • Toshiba B-EX4T1 Print Head

    Thermal transfer print head for the B-EX4T1 printer. The thermal head is available in two resolutions either 300 dpi or 200 dpi. It is located at the front of the printer, on the underside of the print head block.

    ➔ Part number 0TSBC0117201F for 300 dpi
    ➔ Part number 0TSBC0117001F for 200 dpi

  • Toshiba BX Head Up Switch

    A sensor that detects whether the print head is "open". It is located inside the print head block.

    ➔ Part number FMBB0030901

Related Information

Technical Support

For technical support please call 01732 850070

Our office is open Monday to Friday, 9:00am to 17:30pm.